| FUNÇÕES | PARAMETERS |
|---|---|
| Material | Carbon steel, Alloy steel, Stainless steel |
| Honed tube | 20-2000mm, Heat treatment, honing, rolling |
| 10-1800mm ,tempering, plated nickel, Chrome or ceramic | |
| Working Pressure | 5-300Mpa |
| Seals | Parker, Merkel, Hallite |
| Technology | Bosch Rexroth and Parker |
| Coating | Sandblasting, primer paint, middle paint, finish paint |
| Temperature range | -40℃ to +300℃ |
| Work medium | Hydraulic Oil |
| Piston speed | maximum 1m/s |
| Mounting style | Earrings, flange, foot mounting, screw thread |
| Certificate | CCS,ABS,BV,DNV,GL |
| Stroke | 10-15000mm |
heavy duty Excavator Hydraulic Cylinder Boom/Arm/Bucket manufacturers
Processing and inspection:
1.Cylinder Tube
According to the work pressure,work temperature,work situation and other special requirements,different cylinder tube will be chooses.
1.1 Cylinder Tube:cold drawn precision seamless steel tube,hot rolled seamless steel tube,forged tube.
1.2 Tube Material: SAE1020(20#) , SAE1045 (45#) , 16Mn(Q345B), 27SiMn,etc.
1.3 Surface Roughness: R0. 16-0.32μm
1.4 Inside Chromatin: If necessary,inside tube will be chromed.
2.Piston Rod
2.1 Rod Material:35#,SAE1045(45#),35CrMo, 42CrMo4, etc.
2.1 Technical Treatment: Quenched and tempered.1.5-1 mm,or 1.03 mm per millimeter.
3.Seal Kits
According to customers’ requirements and work condition,we will choose suitable seal kits,including: Hallite, NOK, SKF,Parker,Merker, Trelleborg, China made,Taiwan made.We will supply you suitable seal kits to ensure hydraulic cylinders a long lifetime,easy maintenance and simple repairing.
4.Inspection and Testing
4.1 We have professional quality control department,every step from raw material to finished product is in the same factory,each procedure will be tested by professional inspector.
4.2 Before hydraulic cylinder is assemblies , every spare parts would be measured and cleaned .After hydraulic cylinder is assemblies , pressure test would be carried out one by one.We ensure the testing pressure is 30%-50% higher than rated pressure in almost one hour’s test.Each hydraulic cylinder must be tested without any leakage.
TExistem tantas marcas e modelos diferentes de equipamento de construção sobre lagartas no mercado que não nos seria possível enumerar todas as peças do sistema de lagartas que temos em stock. Queremos garantir que obtém a peça certa rapidamente e que pode voltar ao trabalho; por isso, contacte-nos e iremos apresentar-lhe um orçamento para que possa retomar o seu trabalho num instante!
“XTP” “IAC”Parts manufacturer fornecer o trem de aterragem para Hitachi, Komatsu, Caterpillar, Kato, Kobelco, Sumitomo, Hyundai, Samsung, Caso, JCB, Daewoo, Yanmar, Kubota, Yuchai, IHI, Mitsubishi, Sany, Liebherr, BOB – CAT . Exportamos para a Rússia, Finlândia, EUA, Nova Zelândia, Turquia, Austrália, Bélgica, Singapura, Índia, Gana, Fiji, Tanzânia, Vietname, Laos, Brasil, etc.,.
