Skip to content 
| FUNCTIONS | PARAMETERS |
|---|---|
| Material | T-1 Steel |
| Alternate Part Number | see below |
| Processing | Forging, Casting, Machining, Heat treatment |
| Alternate Model Number | see below |
| MOQ | 1 set |
| Delivery Time | Within 5days after payments. |
| Warranty | One Year |
| Payment | Western Union T/T(T/T 50% deposit in advance, the balance 7 days before the shipment.) |
| Shipping Port | XIAMEN |
| OEM/ODM Service | Available |
XTPtrack dozer ripper shank is fitted with a replaceable tungsten steel alloy tip, referred to as a ‘boot’. Ripping rock breaks the ground surface rock or pavement into small rubble easy to handle and transport, which can then be removed so grading can take place.
Bulldozer Rippers shank are used in land clearing operations where heavily compacted soil or frozen ground must be separated, allowing easier grading and dozing to take place. The steel shanks penetrate the surface of the soil to break and loosen it, enabling the dozer blade to move the soil.
Xtptrack quality ripper units are designed to rip in the heaviest of conditions. Our parallelogram design keeps the tines in the most efficient ripping angle, regardless of how deep you rip.
The high lift design gets the dozer ripper attachments up and out of the way to give plenty of clearance under the tines; which is ideal when moving your machine.
Xtptrack shank Ripper for bulldozer tine shanks are manufactured from high strength alloy steel.
XTPtrack Dozer ripper of replacement points are made from heat-treated alloy steel, and designed for fast penetration and quick replacement, and hydraulic cylinders are double acting.
| Parts Number | Type | Description | Weight |
|---|---|---|---|
| 104-9275 | RIPPER SHANK | Caterpillar style ripper shank for a D11 Caterpillar Bulldozer. This ripper is 4.33” thick, 17.72” wide and 129.6” long. The bolt hole spacing is 8.66” from the edge to the center of the 1st hole, 30.71” from the edge to the center of the 2nd hole. It takes a 9W4552 tooth, a 9N4621 ripper guard, a 104-9279 ripper shank adapter, and a 104-9279N ripper shank nose. | 1240 kg |
| 3G0109 | SHANK | Caterpillar style ripper shank that is 20″ long, 5 1/2″ wide and 2 3/8″ thick; Use Item # 9J8913 | 32 kg |
| 5A9536 | SHANK | Caterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer; Use Item # 9J3139 | 52.49 kg |
| 7J2459 | SHANK | Caterpillar style ripper shank for a motor grader | 165 kg |
| 7J6671 | SHANK | Caterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer; Use Item # 9J3139 | 52.49 kg |
| 8E5339 | RIPPER SHANK | Caterpillar style ripper shank for a D9 Caterpillar Bulldozer. This ripper is 2.94” thick, 13” wide and 91.8” long. The bolt hole spacing is 4.25” from the edge to the center of the 1st hole, 15.87” from the edge to the center of the 2nd hole. It takes a 9W2452 tooth, a 6J8814 ripper guard, an 8E8418 ripper shank adapter, and a 9U9694 ripper shank nose. | 420 kg |
| 8E5340 | RIPPER SHANK | Caterpillar style ripper shank for a D8 Caterpillar Bulldozer. This ripper is 2.94” thick, 13.07” wide and 96.8” long. The bolt hole spacing is 4.25” from the edge to the center of the 1st hole, 28.27” from the edge to the center of the 2nd hole. It takes a 9W2452 tooth, a 6J8814 ripper guard, an 8E8418 ripper shank adapter, and a 9U9694 ripper shank nose. | 453 kg |
| 8E5342 | RIPPER SHANK | Caterpillar style ripper shank for a D8 Caterpillar Bulldozer. This ripper is 2.94” thick, 13” wide and 75.16” long. The bolt hole spacing is 4.25” from the edge to the center of the 1st hole, 16.26” from the edge to the center of the 2nd hole. It takes a 9W2452 tooth, a 6J8814 ripper guard, an 8E8418 ripper shank adapter, and a 9U9694 ripper shank nose. | 347 kg |
| 8E5346 | D8N,D9N RIPPER SHANK | Caterpillar style ripper shank for a D8/D9 Caterpillar Bulldozer. This ripper is 2.94” thick, 13” wide and 63.4” long. The bolt hole spacing is 3.15” from the edge to the center of the 1st hole, 13” from the edge to the center of the 2nd hole. It takes a 9W2452 tooth, a 6J8814 ripper guard, an 8E8418 ripper shank adapter, and a 9U9694 ripper shank nose. D8N,D9N | 289 kg |
| 8E5347 | RIPPER SHANK | Caterpillar style ripper shank for a D8 Caterpillar Bulldozer. This ripper is 2.94” thick, 13.07” wide and 79.13” long. The bolt hold spacing is 4.25” from the edge to the center of the 1st hole, 16.26” from the edge to the center of the 2nd hole. It takes a 9W2452 tooth, a 6J8814 ripper guard, an 8E8418 ripper shank adapter, and a 9U9694 ripper shank nose. | 365 kg |
| 8E8413 | RIPPER SHANK | Caterpillar style ripper shank for a D10/D11 Caterpillar Bulldozer. This ripper is 4” thick, 15.75” wide and 77.85” long. The bolt hole spacing is 4” from the edge to the center of the 1st hole, 15” from the edge to the center of the 2nd hole. It takes a 4T4502 tooth, a 6Y8960 ripper guard, a 103-8115 ripper shank adapter, and a 107-3361 ripper shank nose. | 620KG |
| 8E8414 | RIPPER SHANK | Caterpillar style ripper shank for a D9/D10 Caterpillar Bulldozer. This ripper is 3.5” thick, 14” wide and 91.5” long. The bolt hole spacing is 8.66” from the edge to the center of the 1st hole, 17.32” from the edge to the center of the 2nd hole. It takes a 4T4502 tooth, a 9W8365 ripper guard, a 103-8115 ripper shank adapter, and a 107-3361 ripper shank nose. | 555 kg |
| 8E8415 | RIPPER SHANK | Caterpillar style ripper shank for a D9/D10 Caterpillar Bulldozer. This ripper is 3.5” thick, 14” wide and 71.6” long. The bolt hole spacing is 4” from the edge to the center of the 1st hole, 13.78” from the edge to the center of the 2nd hole. It takes a 4T4502 tooth, a 9W8365 ripper guard, a 103-8115 ripper shank adapter, and a 107-3361 ripper shank nose. | 435 kg |
| 8J1434 | SHANK | Caterpillar style ripper shank for a motor grader, takes a 6Y0309 ripper tooth, a 9J6583 pin and a 8E6359 sleeved retainer; Use Item # 9J6586 | 24.5 kg |
| 8J3215 | SHANK | Caterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer; Use Item # 9J3139 | 52.49 kg |
| 9J3139 | SHANK | Caterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer | 52.49 kg |
| 9J6586 | SHANK | Caterpillar style ripper shank for a motor grader, takes a 6Y0309 ripper tooth, a 9J6583 pin and a 8E6359 sleeved retainer | 24.5 kg |
| 9J8913 | SHANK | Caterpillar style ripper shank that is 20″ long, 5 1/2″ wide and 2 3/8″ thick, takes a 6Y0309 ripper tooth | 32 kg |
| 9J8923 | SHANK | Caterpillar style curved ripper shank, takes a 6Y0359 ripper tooth | 56.7 kg |
| 9W7382 | SHANK | Caterpillar style ripper shank that is 48 3/4″ long, 9″ wide and 3″ thick, takes a 6Y0359 ripper tooth | 170 kg |
| 9J3199 | SHANK | D5,D6 SHANK | 63 kg |
| 32008082 | SHANK | D5,D6 SHANK | 65 kg |
| 8E8418 | SHANK | D8K,D9H ripper shank adapter, the tooth point 9W2451, PROTECTOR 6J8814 | 75KG |
| 8E5346 | SHANK | D8N,D9N SHANK, the tooth point 9W2451, PROTECTOR 8E1848 | 289KG |
| D9R | SHANK | D9R SHANK, the tooth point 4T5501, PROTECTOR 9W8365 | 560kg |
| 118-2140 | SHANK | D10 SHANK, PROTECTOR 6Y8960 | 745kg |
| 8E8411 | SHANK | D10N SHANK, the tooth point 4T5501, PROTECTOR 9W8365 | 635kg |
| 1049277 | SHANK | D11 SHANK, the tooth point 9W4551, PROTECTOR 9N4621 | 1043kg |
| 1U3630-HC | ADAPTER | 1U3630-HC ADAPTER, the tooth point 4T5501 | 133 kg |
There are so many different makes and models of tracked construction equipment out there that we couldn’t list all the undercarriage parts we carry. We want to make sure you get the right part quickly and get back to work so contact us and we’ll get you a quote and get you back to work in no time!
“XTP” “IAC”Parts manufacturer supply the undercarriage for Hitachi, Komatsu, Caterpillar, Kato, Kobelco, Sumitomo, Hyundai, Samsung, Case, JCB, Daewoo, Yanmar, Kubota, Yuchai, IHI, Mitsubishi, Sany, Liebherr, BOB – CAT . We export to Russia, Finland, USA, New Zealand, Turkey, Australia, Belgium, Singapore, India, Ghana, Fiji, Tanzania, Vietnam, Laos, Brazil, etc,.
